<?xml version="1.0" encoding="UTF-8"?>
<root>
  <product>
    <product_id>341</product_id>
    <product_title><![CDATA[Separated Neon Flex | 8mm]]></product_title>
    <product_content><![CDATA[Designed to bend. Built to shine.### DIY neon, done properly Separated Neon Flex is made for signmakers, shopfitters and anyone creating custom neon: business logos, feature lettering, wall art, event signs and channel letters. Because the strip and tube are separate, you can route your design straight into acrylic or board, follow tight curves and sharp corners, and finish with a seamless glow that looks like the real thing.The 8mm tube gives a bolder, wider line. It suits larger lettering, shopfront logos and statement signs. If your design needs a finer stroke, look at [Separated Neon Flex | 6mm](https://www.specializedlighting.nz/products/slc-neon-flex-separated-neon-flex-6mm-sstn-6/).### Why choose Separated Neon Flex Seamless and tray-free. No mounting tray or channel, so complex signs keep a clean, modern look. Quick, straightforward setup. Route a groove, lay the strip, then press in the tube. It's an easy way to build custom logos. Ultra-flexible. The tube bends easily for intricate, curved designs and script lettering. Indoor and outdoor ready. Made with durable, high-protection silicone. Cut to suit. The strip can be cut every 25 mm, so it fits your design closely. Low-voltage and efficient. It runs on 12 V DC and draws 8 W per metre. ### Specifications Product codeSSTN-8Input voltage12 V DCPower8 W/mLED typeSMD2835LED quantity120 LEDs/mPCB width6.5 mmCutting unit25 mmNeon tube8mm siliconeTube profile10 mm overall width, 8 mm base, 10 mm high (from the manufacturer drawing)Colours12 (see below)### Colours Choose from 12 colours in the colour menu:Blue, 6500K White, Green, Ice Blue, Lemon Yellow, Mars Green, Pink, Purple, Red, Rose Pink, Warm White and Yellow.There are crisp and warm whites for clean, classic signage, and bright saturated colours for logos and statement pieces.### How to make a neon sign This is how it's done, step by step:Carve the groove. Use a milling cutter to route your design into the backing board or acrylic. Lay the LED strip. Pull the LED strip into the groove. Join separate runs with transparent wire. Wire the power lead. Fit a transparent DC lead to the strip. It gives you a quick connection to a dimmer and power adapter. Cut and fit the neon tube. Cut the tube to length for each part of the design. At corners, make a cut with a vertical knife and then bend the tube to the right angle. Finish the ends with a round cutting knife, then press the tube into the groove. Power up. Connect a 12 V DC adapter and your sign is lit. Tip: test the strip before you fit the tube. Size your 12 V DC power supply to the total length you're running, at 8 W per metre. We can help you work that out.### Need help with your layout? Planning a logo, a run of channel letters or a one-off feature sign? Talk to our sales team. We'll help you choose the tube size and colours and work out how much you need and how to power it.Call +64 9 273 4105 or email info@specializedlighting.nz.Trade customer? Log in at [trade.specializedlighting.nz](https://trade.specializedlighting.nz) for trade pricing and account ordering.]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/341/hero-tube-bundle.png</product_icon>
    <product_brand_id>7</product_brand_id>
    <product_price>36.8000</product_price>
    <product_price_ex_tax>32</product_price_ex_tax>
    <product_price_local_tax>36.8000</product_price_local_tax>
    <product_created_datetime>2026-11-09 23:20:13</product_created_datetime>
    <product_code>SSTN-8</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/slc-neon-flex-separated-neon-flex-8mm-sstn-8/</product_uri>
  </product>
  <product>
    <product_id>340</product_id>
    <product_title><![CDATA[Separated Neon Flex | 6mm]]></product_title>
    <product_content><![CDATA[Designed to bend. Built to shine.### DIY neon, done properly Separated Neon Flex is made for signmakers, shopfitters and anyone creating custom neon: business logos, feature lettering, wall art, event signs and channel letters. Because the strip and tube are separate, you can route your design straight into acrylic or board, follow tight curves and sharp corners, and finish with a seamless glow that looks like the real thing.The 6mm tube gives a fine, crisp line. It suits smaller lettering, script fonts and detailed logos where a slimmer stroke reads better. If your design needs a bolder line, look at [Separated Neon Flex | 8mm](https://www.specializedlighting.nz/products/slc-neon-flex-separated-neon-flex-8mm-sstn-8/).### Why choose Separated Neon Flex Seamless and tray-free. No mounting tray or channel, so complex signs keep a clean, modern look. Quick, straightforward setup. Route a groove, lay the strip, then press in the tube. It's an easy way to build custom logos. Ultra-flexible. The tube bends easily for intricate, curved designs and script lettering. Indoor and outdoor ready. Made with durable, high-protection silicone. Cut to suit. The strip can be cut every 25 mm, so it fits your design closely. Low-voltage and efficient. It runs on 12 V DC and draws 8 W per metre. ### Specifications Product codeSSTN-6Input voltage12 V DCPower8 W/mLED typeSMD2835LED quantity120 LEDs/mPCB width6.5 mmCutting unit25 mmNeon tube6mm siliconeTube profile8 mm overall width, 6 mm base, 9 mm high (from the manufacturer drawing)Colours12 (see below)### Colours Choose from 12 colours in the colour menu:Blue, 6500K, Green, Ice Blue, Lemon Yellow, Mars Green, Pink, Purple, Red, Rose Pink, Warm White and Yellow.There are crisp and warm whites for clean, classic signage, and bright saturated colours for logos and statement pieces.### How to make a neon sign This is how it's done, step by step:Carve the groove. Use a milling cutter to route your design into the backing board or acrylic. Lay the LED strip. Pull the LED strip into the groove. Join separate runs with transparent wire. Wire the power lead. Fit a transparent DC lead to the strip. It gives you a quick connection to a dimmer and power adapter. Cut and fit the neon tube. Cut the tube to length for each part of the design. At corners, make a cut with a vertical knife and then bend the tube to the right angle. Finish the ends with a round cutting knife, then press the tube into the groove. Power up. Connect a 12 V DC adapter and your sign is lit. Tip: test the strip before you fit the tube. Size your 12 V DC power supply to the total length you're running, at 8 W per metre. We can help you work that out.### Need help with your layout? Planning a logo, a run of channel letters or a one-off feature sign? Talk to our sales team. We'll help you choose the tube size and colours and work out how much you need and how to power it.Call +64 9 273 4105 or email info@specializedlighting.nz.Trade customer? Log in at [trade.specializedlighting.nz](https://trade.specializedlighting.nz) for trade pricing and account ordering.]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/340/hero-tube-bundle.png</product_icon>
    <product_brand_id>7</product_brand_id>
    <product_price>32.2000</product_price>
    <product_price_ex_tax>28</product_price_ex_tax>
    <product_price_local_tax>32.2000</product_price_local_tax>
    <product_created_datetime>2026-11-09 23:14:03</product_created_datetime>
    <product_code>SSTN-6</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/slc-neon-flex-separated-neon-flex-6mm-sstn-6/</product_uri>
  </product>
</root>
